Return Line Kits
Aqua-Link
ADP J-tube diffuser return line (Kits) are made of; durable break resistant,
Chlorinated Polyvinyl Chloride.
Some gluing may
be required depending on positioning of parts and set up application. Follow
packing slip information to learn how to acquire set-up instructions.
The
Gentle 180 degree molded J-shape enables greater water flow, without the
restrictions found in other brands that use multiple 90 degree bends.
These
J- tubes are available in 3 standard diameter reaches to accommodate multiple
aquarium frame widths. Each kit comes standard with our (most popular) 1-3/8”
Diameter Reach J-tube by default. However, a choice of either 1-7/8” or 2-3/8”
may be swapped with the default, but such a request must be made with your order
via eBay message before your item is shipped. on
The
Advanced Kits come with tight fitting adjustable nozzle parts so desired
directional flow can be achieved. However these parts are able to be
permanently glued only if desired or needed.
Advanced Return
line kits, will include a back flush siphon break feature designed to disrupt a
siphon and prevent excess water from back flushing into your sump in the event
of a power failure. This feature allows you to extend the return line deeper
into the aquarium providing better water circulation in hard to reach areas
without using additional power heads. This feature is also adjustable to
re-direct back pressure into the aquarium preventing misdirected back spray
inside the aquarium hood.
Duck Bill diffuser
nozzle tip(s) are included with “Advanced Kits”. These nozzles are designed to
spread water out over a broader area for more efficient water circulation.
Adjustable nozzle tips can be rotated to direct this spread where you desire.
Please review all
descriptions below so you can select a kit suitable for your needs.
**Colored company logos or placards may
not be included**
Generic Kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube. Default
Diameter Reach 1-3/8”
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)
    Ratchet hose clamps. (appropriately
sized)
**
Note; back flush siphon break feature is not available with “Generic” Kits**
Advanced Kits
Single Outlet kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube, with siphon
interrupt feature (Default Diameter      
Reach 1-3/8”)
ü
(1)     Flow control valve (⅝” barbed x ½” NMPT)
ü
(1)     NPT to FS adapter.
ü
(1)     Elbow (90°)
ü
(1)     Elbow (45°)
ü
(1)     Duck Bill Diffuser Nozzle.
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)
    Ratchet hose clamps. (appropriately
sized)
Dual Outlet kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube, with siphon
interrupt feature (Default Diameter      
Reach 1-3/8”)
ü
(1)     Flow control valve (⅝” barbed x ½” NMPT)
ü
(1)     NPT to FS adapter.
ü
(2)     Elbow (45°)
ü
(2)     1” Rotation connectors.
ü
(2)     Duck Bill Diffuser Nozzle.
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)
    Ratchet hose clamps. (appropriately
sized)
ü
(1)     Tee fitting.
Multiple Outlet kit
Will Include;
ü
(1)     ⅝” od x ½” id standard J-tube, with siphon
interrupt feature (Default Diameter      
Reach 1-3/8”)
ü
(1)     Flow control valve (⅝” barbed x ½” NMPT)
ü
(1)     NPT to FS adapter.
ü
(2)     Tee fitting.
ü
(1)     Elbow (90°)
ü
(2)     Elbow (45°)
ü
(2)     Tee fitting.
ü
(3)     1” Rotation connectors.
ü
(3)     Duck Bill Diffuser Nozzle.
ü
(2)     ⅝” od x ½” id x 6” Extension pipes
ü
(1)     Vinyl Return Hose ¾” od x ⅝” id x 5 feet.
ü
(2)
    Ratchet hose clamps. (appropriately
sized)
Return
policy details:
Please review the item
descriptions and make sure that sizes, model numbers etc. are what you want
before purchase. There is absolutely NO RETURNS for any reason other than the
item NOT being what is represented in the ad, and in the main photo of each
variation. Seller reserves the right to include, exclude, change design, size,
color, or location, of manufacturers logos and placards. Such changes shall not
be determined as a misrepresentation or defect of the condition or intended
functional properties of the product sold. Claims must be made within 30 days
of receipt. Buyer remorse, buyer purchasing wrong items on accident or on
purpose, i.e. wrong sizes, wrong model numbers, not liking the item once it
arrives etc. are in no way the responsibility of the seller and refunds
WILL NOT be given.
If a defect is
suspected, and before a return request is considered, the buyer must comply
with all examination requested by the seller, i.e. supporting photos, claim
reports, etc. up to and including packaging and return postage prepaid by the
buyer. Seller reserves the right to repair or replace only the particular item
or items suspected of functional defect.
In the unfortunate
event that your order is damaged during transit, contact us and the carrier
immediately within 24 hours The faster you report damage to the carrier, the
faster the claim process will be completed (subject to approval by carrier).
All return shipping cost is the Buyer’s responsibility.
1.
Do not throw away
anything until the return or claim process is completed.
2.
Be sure to keep all
original packaging, materials and parts. Any non-working returns that are
damaged or have missing items will incur additional charge.